QQ Longboard Complete

  • QQ Longboard Complete - 9.25" x 44"

Exo-Skeletech Plastihide Semi Slicks

$199.95 USD

  • Sizes:
    9.25" x 44"

Made in the USA Near Canada! Plastihide is the ultimate controlled speed sliding polymer bottom. Laminated to our world record setting Exo Skeletech construction. Now your skate slides, your graphics last, your board lasts and has more pop!

  • Longboard Complete
  • Bent Metal Galactic Inversion Trucks: Inverted kingpin trucks… these trucks are made to turn, carve and pump. These trucks don’t bite… not a guarantee, but as close as you can get to one.
  • 70mm x 46mm wide, 78A Durometer
  • Exo-Skeletal Construction: Hard and rugged on the outside, light and lively on the inside.
  • Carbon springs: Carbon and fiberglass layers on the inside for long lasting record breaking pop.
  • Anti Razor Tail Technology: Rugged UHMW tip and tail with end grain birch maximize pop and minimize razoring.
  • Bitchin Board Builders. Built one at a time by skateboarders.
  • Mervin the worlds most environMENTAL board factory.

 

Specifications

Width Length Wheelbase Nose Length Tail Length Concave
9.25" 44" 24.25" 7" 8.5" Mild
View all specs

Construction

  • Plastihide top sheet

    Skate Kraftsmen Cass prepping plastihide top sheet.

  • Biaxial fiberglass layer

    Biaxial fiberglass layer for extra pop!

  • Light weight aspen wood core

    Light weight aspen wood core with golfball tough tip & tail material.

  • 84 vertical wood laminates

    84 vertical wood laminates alternating 0° to 90° on the tip & tail, pushing the limits of energy boost & longer skate life!

  • Carbon

    Carbon! For record setting pop!

  • Tough UHMW tip and tails

    Tough abrasion-resistant UHMW tip & tails and impact resistant birch wood sidewalls. Oval power pocket for optimum strenght over truck.

  • Semi-Slick or Pickled Maple

    Sublimated semi-slick plastihide bottom for slide control or pickled maple epoxy wood bottom.

  • Lay-up

    Lay-up.

  • Finishing

    Finish me up!

  • Milling

    Milling to shape.

  • Tuning the shape

    Skate kraftsmen Huntz fine tuning the shape.

  • Sanding

    Sanding.

  • Buffing

    Buffing and waxing.

  • Polishing

    Polishing and quality control.

Ingredients

  • Exo-Skeletech Plastihide Semi Slicks

    Made in the USA Near Canada!

    Plastihide is the ultimate controlled speed sliding polymer bottom. Laminated to our world record setting Exo Skeletech construction. Now your skate slides, your graphics last, your board lasts and has more pop!

  • Exo-Skeletech Construction

    Hard and rugged on the outside, light and lively on the inside.

  • Carbon Springs

    Carbon and fiberglass layers on the inside for long lasting record breaking pop.

  • Anti Razor Tail Technology

    Rugged UHMW tip and tail with end grain birch maximize pop and minimize razoring.

  • Eco Sublimation

    Mervin’s unique water based graphic process. No toxic solvents or curtain coats used in manufacturing process. If a snowboard has a thick clear glossy on top it was really toxic to make. Lib Tech gives you an environmentally friendly alternative. NO TOXIC SOLVENT BASED INKS OR CLEAR COATS.

Discussion

Choose your region
North America
World

View site in English