Rocker entry reCURVE Magne-Traction good times all the time. All terrain pow sticks with a long entry pulled in nose that promises you won’t be levitated into the back seat when things get big, deep and loose.
10 = Firm
|View all specs|
SERRATED STEAKNIFE EDGE GRIP: Magne-Traction adds edgehold and focuses the control and power under your feet where your balance is centered. Each bump or serration is strategically sized and positioned. The most aggressive bumps are in the center near and under your boot for maximum edgehold and control. The bumps are progressively less aggressive out towards the tip and tails creating catch-free user friendly tips and tails. Magne-Traction’s incredible edge control when combined with reCURVE’s easy turn initiation and float make for an unreal smooth ride in all terrain and conditions from ice to pow.
The extra edgehold you get allows you to ride your narrow ass boards de-tuned for the park and rails and still get great edgehold all over the mountain. Take a file and round your edges so they don’t hang up on the rails, boxes or ledges. Then go ride everywhere!
Ridden and designed by Mike Wilson and the Lib Tech experiMENTAL division, reCURVE Magne-Traction lifts your tip and tails from ends of camber to traditional contact points, creating a “dynamic early rise” when boot pressure is applied to center of short camber. Easy float in broken snow and pow, mild pre-initiation for hardpack and ice carving, catch-free for jib presses, etc. and ideal for most of the market: beginners, average recreational men and women, park / freestyle jib kids, freeriders, pow, doctors, lawyers, heli guides & rippers.
Featured on POW, Magic Horsepower Freeride, Freeride, Wreckcreate and Fully Functional Five NAS. Pow specific reCURVE (Rocker/Camber/Rocker) incorporates the additional float, lift and pre-initiation of rocker beyond the short camber fulcrum.
SUPER LIGHT SPIN WEIGHT! The perfect blend of pickles and mustard. UHMW sidewalls, Power Transfer Internal Sidewalls, torsionally loose. The new kids think they are new!
ExperiMENTAL division leader Mike Olson loves beans! When he’s not eating them he’s buying plastics made with them. Lib Tech has made a commitment to using a new earth friendly, bio-plastic top skin made from beans that features the highest strength-to-weight ratio of any top sheet in the industry.
Mervin’s unique water based graphic process. No toxic solvents or curtain coats used in manufacturing process. If a snowboard has a thick clear glossy on top it was really toxic to make. Lib Tech gives you an environmentally friendly alternative. NO TOXIC SOLVENT BASED INKS OR CLEAR COATS.
Super tough base material that holds wax well due to its compression formed amorphous polymer structure. Super fast when waxed with Oneballjay.
On The Bottom. Coming in hot!
Strength, power, and pop!
What our NAS Rippers ride.
Light, strong and lively long fibers.
Tough! Great wax retention.
BITCHIN’ BOARD BUILDERS We build snowboards. We build snowboards. No really… that is what we do. We don’t order them from China or anywhere else and send someone to go check and see how they turned out. We physically hand build them right here at home in the USA.
Shop in EURO currency
View site in English