cad
gbp
eur
chf
MTX Magne-Traction® Edge Tuning Tool
For tuning up your Magne-Traction Board. This small tool fits into the grooves of your sidecut. Sharp edges rip!
90 and 88 Degrees.
Use the MTX Edge Tuning Tool to sharpen side edges. Start from the tip and pull smoothly with firm pressure to the tail. Do this in smooth passes until the edges are sharp. Repeat on the other side. Remember to flip the file around so that the teeth face the proper direction... look for the arrow.
PRO TIP:
When you place the tool on your edge. The number of degrees on the tool which is below the file is the number of the bevel the guide is delivering to your edge.
90 and 88 Degrees.
Use the MTX Edge Tuning Tool to sharpen side edges. Start from the tip and pull smoothly with firm pressure to the tail. Do this in smooth passes until the edges are sharp. Repeat on the other side. Remember to flip the file around so that the teeth face the proper direction... look for the arrow.
PRO TIP:
When you place the tool on your edge. The number of degrees on the tool which is below the file is the number of the bevel the guide is delivering to your edge.
Write Your Own Review
Similar Items
You might also like
-
JL Ship 30YR Riding Sock$24.99 -
JL Ship 30YR Tee$49.99 -
JL Ship 30YR Trucker Cap$24.99 -
JL Ship 30YR Zip Hoodie$89.99 -
Poly Diecut Sticker$9.99
